Getting the width right at the mill is the difference between a fitter making one cut and a fitter making three. On a long pipe run that is hours of labour and a pile of offcuts.
Specifications
| Item | Specification |
|---|---|
| Alloy | 1060 / 1100 / 3003 |
| Temper | O / H18 / H24 |
| Thickness | 0.2–3.0 mm |
| Width | 200–1333 mm |
| Thickness tolerance | ±0.01 mm |
| Minimum order, standard specification | 1 MT |
| Minimum order, custom specification | 6 MT |
Key Features
- Slit to the width your pipe and insulation combination needs, overlap included.
- Supplied in coil weights sized for handling on a scaffold rather than in a workshop.
- Consistent gauge along the run, so banding and screws seat the same way from end to end.
- Edges trimmed clean; no burr to catch gloves during installation.
Applications
Specified on projects where the pipework is jacketed after the insulation goes on, and the jacket has to last as long as the plant.
- Refinery and chemical plant piping
- District heating and steam lines
- Chilled water and refrigeration lines
- Boiler house and utility runs
Ordering Information
Send us alloy, temper, thickness, width, coil inner diameter and quantity, and you will get a specific answer rather than a range. Standard specifications start at 1 MT; material made to your own drawing starts at 6 MT. If what you need falls outside the table above, send it anyway. We would rather say plainly that it does not fit our lines than take the order and miss the date.




