There are two profile families. Trapezoidal sheet has straight flat ribs and suits wide span factories and warehouses. Tile profile sheet carries a stepped pattern and lays up to look like a traditional tiled roof. Length is cut to the roof slope.
Specifications
| Item | Specification |
|---|---|
| Alloy | 1060 / 1100 / 3003 |
| Temper | O / H18 / H24 |
| Thickness | 0.2–3.0 mm |
| Width | 200–1333 mm |
| Thickness tolerance | ±0.01 mm |
| Minimum order, standard specification | 1 MT |
| Minimum order, custom specification | 6 MT |
| Coating system | PE / PVDF |
| Colour | RAL |
| Profile | Trapezoidal / Tile |
Key Features
- Aluminium does not rust, so cut edges and fastener holes do not bleed rust the way galvanised steel does.
- Light weight, which asks less of the purlins and the roof frame.
- Polyester coating for general building work, PVDF for coastal and chemical plant sites where weathering is severe.
- Cut to slope length, so one sheet can run from ridge to eave with fewer end laps.
Applications
Colour coated roofing sheet goes onto roofs and walls where weight and corrosion both matter.
- Industrial plant and logistics warehouse roofs
- Coastal and chemical plant buildings
- Houses and villas with pitched roofs
- Carports, canopies and hoardings
Ordering
Tell us the alloy, temper, thickness, width and quantity and you will get a specific quotation, not a range. The minimum order is 1 MT for standard specifications and 6 MT for sizes made to drawing. If what you need falls outside the table above, send it anyway. If the line cannot run it we will say so, and will not take an order we would deliver late. When you enquire, attach the profile drawing or the rib height and pitch, and state the sheet length and colour.
Common roofing profiles
Coil is roll-formed into the sections below. Each model is named rib height - pitch - cover width, in mm.
Corrugated (sine wave)
| Section | Model | Rib height (mm) | Pitch (mm) | Cover width (mm) | Feed width (mm) |
|---|---|---|---|---|---|
| YX13-65-845 | 13 | 65 | 845 | 1000 | |
| YX13-65-850 | 13 | 65 | 850 | 1000 | |
| YX18-63.5-825 | 18 | 63.5 | 825 | 1000 | |
| YX18-76-836 | 18 | 76 | 836 | — | |
| YX9-32-890 | 9 | 32 | 890 | — |
Trapezoidal
| Section | Model | Rib height (mm) | Pitch (mm) | Cover width (mm) | Feed width (mm) |
|---|---|---|---|---|---|
| YX15-225-900 | 15 | 225 | 900 | — | |
| YX25-210-840 | 25 | 210 | 840 | 1000 | |
| YX35-125-750 | 35 | 125 | 750 | 1000 | |
| YX8-130-910 | 8 | 130 | 910 | — |
Sections show two pitches with the height exaggerated, for illustration only. For a profile not listed, send the section drawing or a sample with your enquiry and we will confirm whether we can form it.





