We supply the coil and sheet that feeds those profiling lines, in tempers that take the forming without splitting at the crown of the wave.
Specifications
| Item | Specification |
|---|---|
| Alloy | 1060 / 1100 / 3003 |
| Temper | O / H18 / H24 |
| Thickness | 0.2–3.0 mm |
| Width | 200–1333 mm |
| Thickness tolerance | ±0.01 mm |
| Minimum order, standard specification | 1 MT |
| Minimum order, custom specification | 6 MT |
Key Features
- Tempers selected so the material takes the profile without splitting at the crown.
- Even gauge across the width, so profile depth is consistent panel to panel.
- Mill finish or colour coated stock, depending on whether the panel is painted after forming.
- Slit to the coil width your profiling line runs.
Applications
Profiled aluminium sheet goes onto buildings where weight, corrosion or span rules out steel.
- Industrial roofing and wall cladding
- Agricultural and storage buildings
- Coastal and chemical plant structures
- Decorative screening and facades
Ordering Information
Send us alloy, temper, thickness, width, coil inner diameter and quantity, and you will get a specific answer rather than a range. Standard specifications start at 1 MT; material made to your own drawing starts at 6 MT. If what you need falls outside the table above, send it anyway. We would rather say plainly that it does not fit our lines than take the order and miss the date.
Common roofing profiles
Coil is roll-formed into the sections below. Each model is named rib height - pitch - cover width, in mm.
Corrugated (sine wave)
| Section | Model | Rib height (mm) | Pitch (mm) | Cover width (mm) | Feed width (mm) |
|---|---|---|---|---|---|
| YX13-65-845 | 13 | 65 | 845 | 1000 | |
| YX13-65-850 | 13 | 65 | 850 | 1000 | |
| YX18-63.5-825 | 18 | 63.5 | 825 | 1000 | |
| YX18-76-836 | 18 | 76 | 836 | — | |
| YX9-32-890 | 9 | 32 | 890 | — |
Trapezoidal
| Section | Model | Rib height (mm) | Pitch (mm) | Cover width (mm) | Feed width (mm) |
|---|---|---|---|---|---|
| YX15-225-900 | 15 | 225 | 900 | — | |
| YX25-210-840 | 25 | 210 | 840 | 1000 | |
| YX35-125-750 | 35 | 125 | 750 | 1000 | |
| YX8-130-910 | 8 | 130 | 910 | — |
Sections show two pitches with the height exaggerated, for illustration only. For a profile not listed, send the section drawing or a sample with your enquiry and we will confirm whether we can form it.





