What the forming line cares about is gauge consistency and edge quality. A strip that varies in thickness gives a tube with a twist in it, and a twisted baffle will not sit straight in a ceiling grid.
Specifications
| Item | Specification |
|---|---|
| Alloy | 1060 / 1100 / 3003 |
| Temper | O / H18 / H24 |
| Thickness | 0.2–3.0 mm |
| Width | 200–1333 mm |
| Thickness tolerance | ±0.01 mm |
| Minimum order, standard specification | 1 MT |
| Minimum order, custom specification | 6 MT |
Key Features
- Gauge held along the full coil, so the formed tube keeps its section from end to end.
- Edges trimmed for continuous feeding; no burr to snag in the roll stand.
- Tempers chosen to fold to a square corner without splitting on the outside of the bend.
- Coated stock available where the visible face is a finished colour.
Applications
Goes to fabricators running continuous forming lines for interior metalwork.
- Ceiling baffles and linear tube systems
- Ceiling grids and open cell systems
- Decorative screens and partitions
- Light troughs and service enclosures
Ordering Information
Send us alloy, temper, thickness, width, coil inner diameter and quantity, and you will get a specific answer rather than a range. Standard specifications start at 1 MT; material made to your own drawing starts at 6 MT. If what you need falls outside the table above, send it anyway. We would rather say plainly that it does not fit our lines than take the order and miss the date.





