Stamping Aluminum Stock

Stamping stock is supplied to a forming specification rather than a surface specification. What matters is that it draws without tearing, holds dimension after the press and behaves the same way on Monday as it did on Friday.

Press shops do not tune a die for every coil. If one coil work-hardens differently from the last, the reject rate tells them before the certificate does.

Specifications

ItemSpecification
Alloy1060 / 1100 / 3003
TemperO / H18 / H24
Thickness0.2–3.0 mm
Width200–1333 mm
Thickness tolerance±0.01 mm
Minimum order, standard specification1 MT
Minimum order, custom specification6 MT

Key Features

  • O temper for deep drawing; H24 where the part needs some stiffness after forming.
  • Grain structure controlled through annealing so draw depth is repeatable coil to coil.
  • Surface clean and evenly oiled where the process needs it, so the blank feeds without sticking.
  • Supplied as coil for progressive dies or as blanks cut to your outline.

Applications

Goes to press shops making formed parts in volume, where a percentage point of scrap is real money.

  • Deep-drawn housings and containers
  • Appliance and electronics components
  • Lighting and reflector parts
  • Automotive brackets and covers

Ordering Information

Send us alloy, temper, thickness, width, coil inner diameter and quantity, and you will get a specific answer rather than a range. Standard specifications start at 1 MT; material made to your own drawing starts at 6 MT. If what you need falls outside the table above, send it anyway. We would rather say plainly that it does not fit our lines than take the order and miss the date.

APPLICATIONS

Where This Material Is Used

FULL IN-HOUSE CHAIN

How It Is Made

  • Melting

    01

    Melting

  • Cast Rolling

    02

    Cast Rolling

  • Annealing

    03

    Annealing

Aluminium packed in a wooden export case

PACKAGING

Packaging made to your requirements

Standard export packing is a moisture barrier with edge protectors, coils on wooden pallets and sheets in wooden cases. Packing method, shipping marks and unit weight can all be made to your requirements.

REQUEST A QUOTE

Send an enquiry

We reply from a company address. Your details are used to answer the enquiry and nothing else.

Request a Quote

FURTHER READING

Related Reading