We supply six patterns: large five-bar, small five-bar, three-bar, lentil, pointer and embossed. All three alloys, 1060, 1100 and 3003, are available. We deliver in coil or cut to length as plate.
Specifications
| Item | Specification |
|---|---|
| Alloy | 1060 / 1100 / 3003 |
| Temper | O / H18 / H24 |
| Thickness | 0.2–3.0 mm |
| Width | 200–1333 mm |
| Thickness tolerance | ±0.01 mm |
| Minimum order, standard specification | 1 MT |
| Minimum order, custom specification | 6 MT |
| Pattern | Six patterns, see the illustration below |
| Format | Coil / cut-to-length plate |
Key Features
- The bars stand proud of the plate surface and keep enough friction when wet or oily.
- The pattern is formed by the rolls in a single pass. The bars run evenly across the whole plate, so the pattern lines up when plates are joined.
- 3003 has higher strength and corrosion resistance than pure aluminium and suits vehicle body floors and outdoor platforms. 1060 and 1100 have good formability and suit bending and decorative uses.
- It weighs about one third as much as steel plate of the same thickness. It does not rust and needs no coating in damp conditions.
Applications
Aluminium checkered plate is used on floors and decks that need both slip resistance and low weight.
- Floors of box trucks and refrigerated trucks
- Stair treads and access platforms
- Cold store and workshop floors
- Toolboxes and equipment housings
Ordering Information
Tell us the alloy, temper, thickness, width and quantity, and you will receive a specific quotation rather than a vague range. Standard specifications start at 1 MT; material made to your own drawing starts at 6 MT. If the specification you need is outside the range in the table above, you can still send an enquiry. If our lines cannot produce it, we will tell you so plainly rather than accept the order and delay delivery. In your enquiry, state the pattern type and whether you are ordering by base thickness or by thickness including the bars.
Tread patterns
All six patterns are available. Name the pattern in your enquiry. The drawings show the layout only; rib height and pattern size follow the physical sample.
- Large five-bar
- Small five-bar
- Three-bar
- Lentil
- Pointer
- Embossed





