Strip runs on the same rolling lines as our wider coil, so alloy, temper and thickness tolerance are identical. What changes is the slitting, the edge condition and the way the coil is wound.
Specifications
| Item | Specification |
|---|---|
| Alloy | 1060 / 1100 / 3003 |
| Temper | O / H18 / H24 |
| Thickness | 0.2–3.0 mm |
| Width | 200–1333 mm |
| Thickness tolerance | ±0.01 mm |
| Minimum order, standard specification | 1 MT |
| Minimum order, custom specification | 6 MT |
Key Features
- Slit width from 200 mm, cut in house rather than bought in already slit.
- Burr-free edges; edge condition can be specified when the strip feeds a continuous process.
- Wound to the coil inner diameter and coil weight your line can handle.
- O temper where the part is drawn deep, H18 and H24 where it has to hold its shape.
Applications
Strip goes to anyone running a continuous process where material comes off a coil and into a machine.
- Roll-formed sections and channels
- Stamped and deep-drawn parts
- Cable and transformer winding
- Fin stock and tube stock
Ordering Information
Send us alloy, temper, thickness, width, coil inner diameter and quantity, and you will get a specific answer rather than a range. Standard specifications start at 1 MT; material made to your own drawing starts at 6 MT. If what you need falls outside the table above, send it anyway. We would rather say plainly that it does not fit our lines than take the order and miss the date.






