It can be supplied as coil or cut to length as sheet. After brushing, it can be used as it is, or it can be anodised or covered with protective film.
Specifications
| Item | Specification |
|---|---|
| Alloy | 1060 / 1100 / 3003 |
| Temper | O / H18 / H24 |
| Thickness | 0.2–3.0 mm |
| Width | 200–1333 mm |
| Thickness tolerance | ±0.01 mm |
| Minimum order, standard specification | 1 MT |
| Minimum order, custom specification | 6 MT |
| Surface | Brushed |
| Format | Coil / cut-to-length sheet |
Key Features
- The grain is continuous and even, with no visible joins across the sheet.
- The matt surface does not readily show fingerprints or fine scratches. It suits panels that are handled often.
- The base material is standard cold-rolled sheet, with the same thickness tolerance of ±0.01 mm.
- It can then be anodised or covered with protective film for a more durable surface.
Applications
Brushed sheet is used where a metallic look is needed without strong reflection.
- Home appliance panels and trim strips
- Lift car and interior decoration panels
- Signs and nameplates
- Electronic product housings
Ordering Information
Tell us the alloy, temper, dimensions and quantity, and we will give a firm quote, not an estimated range. Standard specifications start at 1 MT; material made to your own drawing starts at 6 MT. In your enquiry, state the grain direction and whether protective film is required. If our lines cannot make what you need, we will tell you directly rather than take the order and delay delivery.





