Coating in coil form rather than after fabrication means film thickness is even across the width and along the length, and the panel can still be cut, bent and punched afterwards.
Specifications
| Item | Specification |
|---|---|
| Alloy | 1060 / 1100 / 3003 |
| Temper | O / H18 / H24 |
| Thickness | 0.2–3.0 mm |
| Width | 200–1333 mm |
| Thickness tolerance | ±0.01 mm |
| Minimum order, standard specification | 1 MT |
| Minimum order, custom specification | 6 MT |
| Coating system | PE / PVDF |
| Colour reference | RAL |
Key Features
- Polyester for interior work and general exterior use; PVDF where the panel faces weather for decades.
- Colour matched to RAL, with custom colours run when the quantity supports it.
- Coated in coil, so film thickness is the same at the head and the tail of the run.
- Bends and forms after coating without the film lifting at the radius.
Applications
Colour coated coil is the material behind most of the aluminium you can actually see on a building.
- Curtain wall and cladding panels
- Roofing and wall sheeting
- Ceiling systems and interior panels
- Signage and appliance housings
Ordering Information
Send us alloy, temper, thickness, width, coil inner diameter and quantity, and you will get a specific answer rather than a range. Standard specifications start at 1 MT; material made to your own drawing starts at 6 MT. If what you need falls outside the table above, send it anyway. We would rather say plainly that it does not fit our lines than take the order and miss the date.






