Most of what leaves the plant starts here. Some of it goes to fabricators who do their own forming and finishing, and the rest becomes the substrate for our own coating, anodising and embossing lines.
Specifications
| Item | Specification |
|---|---|
| Alloy | 1060 / 1100 / 3003 |
| Temper | O / H18 / H24 |
| Thickness | 0.2–3.0 mm |
| Width | 200–1333 mm |
| Thickness tolerance | ±0.01 mm |
| Minimum order, standard specification | 1 MT |
| Minimum order, custom specification | 6 MT |
Key Features
- Thickness held to ±0.01 mm and checked on the line, not only at the end of the run.
- Cast-rolled and cold-rolled routes both available, so temper and grain structure suit the forming process you use.
- Slit on our own lines, with trimmed edges and coils rewound to the inner diameter you specify.
- Surface left clean and free of rolling oil, ready for coating, anodising or direct forming.
Applications
Mill finish material is specified where the surface will be painted later, or where it sits in a position that nobody sees.
- Fabricated panels, enclosures and housings
- Substrate for coated and anodised products
- Deep-drawn and stamped components
- General sheet metal work
Ordering Information
Send us alloy, temper, thickness, width, coil inner diameter and quantity, and you will get a specific answer rather than a range. Standard specifications start at 1 MT; material made to your own drawing starts at 6 MT. If what you need falls outside the table above, send it anyway. We would rather say plainly that it does not fit our lines than take the order and miss the date.







